CyberPower CP550SLG Standby UPS  MFR #CP550SLG

550VA / 330W Simulated Sine Wave UPS

8 Total Outlets

EMI/RFI Filters, Quiet Operation

LED Indicators, Audible Alarms

Resettable Circuit Breaker

Multiple Mounting Options

RJ11 Protection (1-In / 2-Out)

Windows Compatibility

CyberPower 650VA 8-Outlet UPS System 

650VA/390W Simulated Sine Wave UPS

Standby Topology

Energy-Conserving ECO Technology

Multifunction Diagnostic LCD

GreenPower UPS Technology

ENERGY STAR Qualified

Full-Time Surge Protection

8 x Outlets / USB Port / RJ11 Protection

EMI / RFI Filters

CyberPower CP1000AVRLCD Intelligent LCD UPS 

Output: 1000VA / 600W

Input: 120V @ 60 Hz ±3 Hz

5 x Battery/Surge Protected Outlets

9 x Total NEMA 5-15R Outlets

Recharge Time: 8 Hours

Line-Interactive Topology

Automatic Voltage Regulation (AVR)

1080 Joules Surge Suppression

Phone RJ11/Ethernet RJ45/Coax Protection

Multifunction LCD Panel

CyberPower Intelligent LCD CP1500AVRLCD Uninterrupted Power Supply 

Output: 900 Watts / 1500 VA

Input: 120V

6 x Battery & Surge Protected Outlets

6 x Surge Protected Outlets

Recharge Time: 8 Hours

Line-Interactive Topology

AVR and GreenPower UPS

Integrated Multi-Function LCD Display

RJ11 / RJ45 and Coax Protection

USB & Serial Ports, EMI/RFI Filters

Tripplite 2400W Line Conditioner

Line Conditioner 2400-Watt 120V 60Hz 6-Outlets 6ft Cord

Mfg Part# LC2400 / #312

Protects sensitive electronics, computer accessories and home theater equipment from power-related damage and performance problems

Advanced automatic voltage regulation corrects brownouts and over voltages

Powerful 1440-joule surge protection rating

APC Automatic Voltage Regulator, LE1200,

Line-R 1200VA

The APC Line-R automatically corrects brownouts (by boosting low voltage) and overvoltages (by stepping down high voltage) from the power utility service to levels that are safe for computers, as well as other sensitive equipment.

The Line-R provides an ON/OFF power switch/circuit breaker which functions as the master power switch for the Line-R and all devices connected to the device

ON/OFF Power Switch/Circuit Breaker applies and removes power to/from the Line-R. This switch also functions as a circuit breaker in the event of an over-load condition.

The total power consumption of all equipment plugged into the Line-R must not exceed the “Maximum Output Power Capacity” rating listed in the Specifications table. A total load in excess of this rating will cause the power switch/circuit breaker to “trip”

How to use: 1) Select Input Voltage 2) Plug the Line-R into Wall Outlet 3) Connect your Equipment 4) Switch ON the Line-R